Serving the San Francisco area  ·  (628) 356-4308  ·  Open Mon-Sun 7am-7pm
📞 (628) 356-4308 Free Quote

Metal Roofing in Sausalito, CA (94965) · Local Professionals

San Francisco Metal Roofing · Fast response in Sausalito and the San Francisco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sausalito is a town of steep hillside homes stacked above the bay, where salt air and fog hit every roof plane and fastener year-round. From the floating homes off Gate 6 Road to the Victorians and mid-century cottages climbing Bridgeway and Prospect Avenue, the housing stock here is exposed, tightly packed, and often hard to access.

That is why homeowners in 94965 call San Francisco Metal Roofing. We have worked these hills since 2009, and we know how salt fog corrodes fasteners, how wind funnels through the Sausalito valley, and how a small flashing gap above a bay-view deck can turn into a soaked ceiling after one atmospheric river. We are a Metal Roofing Alliance member and fully insured, and we treat every Sausalito roof like it has to survive the marine layer, because it does.

Metal Roofing in Sausalito (94965)

Sausalito properties sit on some of the tightest, steepest lots in the Bay Area. Many homes are built into the grade with little or no side yard, so staging materials means planning around narrow driveways, shared easements, and decks that cantilever over the hill. The salt air is relentless: it attacks screw heads, seam edges, and flashing before the panels themselves show wear. We see failed fasteners and separated seams on older metal roofs near the waterfront far more often than we see panel failure. Fog and damp winters also mean that roof ventilation and flashing details have to be right, or condensation and leaks show up in the same spots every season. We handle Screw Replacement & Re-Fastening and Copper & Specialty Metal Roofing with crews who are used to working on steep pitches and tight access. Our experience serving Sausalito and the San Francisco area, since 2009.

Our services in Sausalito

How a Job Works in Sausalito

Step 1: You call (628) 356-4308 or request a free estimate. We schedule an on-site assessment, walk the roof and the perimeter, and check fasteners, seams, flashing, and drainage. You get a written scope with photos and a clear price before any work starts.

Step 2: We handle the work itself. On Sausalito hillside jobs that often means coordinating narrow access, protecting landscaping, and scheduling around foggy mornings. If your property is in a historic or HOA overlay, we help you understand what the city and your association will require before we order panels, and we pull the permits through the proper channels.

Step 3: Cleanup and final walkthrough. We magnet-sweep for fasteners, haul away old material, and walk the finished roof with you. We leave your property clean and show you exactly what was done.

Pricing in Sausalito reflects the access and the exposure. Metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, screw replacement and re-fastening at $750, flashing and skylight repair at $600, and gutters for metal roofs at $9 per linear foot. Coating and painting start at $2.50 per square foot. The biggest cost factors are roof size and pitch, how tight the lot access is, the condition of the existing roof and decking, and how urgent the work is. Call (628) 356-4308 for a free estimate with real numbers for your Sausalito property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sausalito and nearby areas.

My Sausalito home is built into the hill above Bridgeway. Can you access a roof like that without damaging my deck or landscaping?
Yes. Hillside access is normal for us here. We assess the approach during the free estimate, use ladders and staging that fit the grade, protect decks and plantings, and plan material delivery around your driveway and easements. If a crane or special lift is needed, we tell you upfront.
A storm just peeled back panels on my roof in Sausalito. How fast can you respond?
Call (628) 356-4308 and describe the damage. We prioritize active leaks and wind-lifted panels, and we can inspect and secure the roof quickly. We document the damage with photos for your insurance file, though coverage decisions are always up to your insurer.
What does a typical metal roof repair cost in 94965?
Most repairs start at $450, and screw replacement and re-fastening starts at $750. Flashing, chimney, and skylight repairs start at $600. The final price depends on roof pitch, access, and how much corrosion or damage we find once we are on the roof.
Do I need a permit to replace my roof in Sausalito, and how do I check the rules?
A full replacement or re-roof commonly requires a permit, and thresholds and inspection requirements vary. We recommend confirming the current rules with the City of Sausalito before scheduling work. We can help you navigate the process and pull the permit as part of the job.
My neighbor says my roof drains onto their property. What should I do about the property line?
Drainage and property line issues are common on Sausalito's tight lots. We can inspect how your roof and gutters discharge water and recommend corrections like gutter extensions or repositioned downspouts. For boundary disputes, check your survey and talk with your neighbor before work begins.
Are you insured for work on my Sausalito property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide proof of insurance before work starts, which protects you and your property.
What maintenance should I do on a metal roof in Sausalito to prevent salt-air damage?
Have fasteners and seams checked annually, especially on roofs near the water. Salt fog corrodes screw heads and flashing first, so catching that early prevents leaks. We offer inspections and re-fastening, and we can advise on coatings that suit the marine environment.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Francisco

All your work handled by qualified professionals in San Francisco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in San Francisco

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Francisco · Response within 24h · No commitment · ☎ (628) 356-4308

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Francisco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm