Serving the San Francisco area  ·  (628) 356-4308  ·  Open Mon-Sun 7am-7pm
📞 (628) 356-4308 Free Quote

Metal Roofing in Alameda, CA (94501) · Local Professionals

San Francisco Metal Roofing · Fast response in Alameda and the San Francisco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Alameda is an island city where Victorian and Edwardian homes on streets like Santa Clara Avenue and Central Avenue have been taking bay salt air and fog for well over a century. The ornate cornices, bay windows, and low-slope roofs hidden behind parapets are part of what makes this place recognizable, and they are also where roofing problems tend to start. If you live near Crown Memorial State Beach or over by the Alameda Theatre, you already know the marine layer does not let up.

Homeowners in Alameda (94501) call San Francisco Metal Roofing because we understand what salt air does to fasteners, flashing, and seams. We have been working on Bay Area roofs since 2009, and we know the difference between a roof that looks fine from the street and one that is actually ready for the next atmospheric river.

Metal Roofing in Alameda (94501)

Alameda's housing stock is a mix of 1880s to 1910s Victorians and Edwardians, 1920s Spanish Revival homes, and mid-century stucco row houses, often on narrow lots with tight side yards and detached garages at the back. That means access matters. We plan staging and material delivery around driveways, shared easements, and the fact that many of these homes have mature trees, original redwood siding, and decorative trim that has to be protected during the job. The salt air off the bay attacks fasteners and flashing first, so we pay close attention to screw replacement, re-fastening, and chimney and skylight flashing on older homes. Flat and low-slope sections behind parapets are common, and they need proper drainage and seam work, not just a coating over a problem. Our crews are fully insured with general liability and workers' compensation, and we handle metal roof coating and painting as well as flashing repair for these older Alameda homes.

We have served Alameda and the surrounding San Francisco area since 2009, and we are a Metal Roofing Alliance member. Whether you are near Franklin Park or off Park Street, we know the local conditions and the local building stock.

Our services in Alameda

How a Job Works in Alameda

Step 1: You call us at (628) 356-4308 or request a free on-site assessment. We inspect the roof, the flashing, the fasteners, and the attic or crawl space if accessible, then give you a clear written estimate. No pressure, no vague numbers.

Step 2: Once you approve, we schedule the work and handle the details. In Alameda, that often means coordinating with the city on permits and planning around tight lot access, shared driveways, and mature landscaping. If your home is in a historic district or under HOA review, we help you understand what panel profiles and colors are likely to be approved before we order materials.

Step 3: We clean up daily and do a final walkthrough with you. We haul away old materials, check that gutters and downspouts are clear, and make sure you know exactly what was done and what to watch for. We leave your property clean.

Pricing in Alameda depends on the size and pitch of your roof, access, the condition of the existing decking and flashing, and how urgent the job is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and metal roof over shingles (retrofit) at $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. These are starting figures, not a quote. Call (628) 356-4308 for a free estimate and a realistic number for your Alameda home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Alameda and nearby areas.

My Victorian near Santa Clara Avenue has original flashing and a low-slope section behind a parapet. What should I watch for?
On older Alameda Victorians, the parapet area is where water tends to sit and where flashing often fails first. Look for rusted or lifted flashing, loose fasteners, and staining on the ceiling below. We inspect those areas closely and can repair flashing, replace fasteners, or recommend a coating if the metal is still sound. Call us for a free assessment.
A storm just lifted some panels on my roof near Crown Memorial State Beach. How fast can you respond?
We treat wind-lifted and peeled panels as a priority because they can let water in fast. Call (628) 356-4308 and we will schedule an inspection as soon as possible, secure the area if needed, and give you a repair plan. We serve Alameda and the surrounding area.
What does a typical metal roof repair cost in Alameda, and what changes the price?
Most repairs start at $450, and screw replacement and re-fastening starts at $750. The final price depends on roof access, the number of problem areas, whether flashing or decking needs work, and urgency. A free estimate is the best way to get a real number for your home.
Do I need a permit for a metal roof replacement in Alameda, and where do I check?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary. We recommend confirming the current rules with the City of Alameda website before work begins, and we can help you understand what is typically needed. We always defer to the local building department on permit requirements.
My neighbor and I share a property line near our garages. What should we know before reroofing?
Shared property lines and tight side yards are common in Alameda. We plan access and staging carefully, keep materials on your side of the line, and coordinate with you if any work near the boundary is needed. If your home is under HOA review, we can help you prepare the information the board typically asks for before ordering materials.
Are you insured for work on my Alameda property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before work begins so you have peace of mind.
What maintenance should Alameda homeowners do to make a metal roof last?
Salt air and fog are hard on fasteners and flashing, so check them annually and after big storms. Keep gutters and downspouts clear, trim tree limbs away from the roof, and address small leaks before they spread. A periodic inspection and coating can extend the life of the metal, especially on older homes near the water.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Francisco

All your work handled by qualified professionals in San Francisco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in San Francisco

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Francisco · Response within 24h · No commitment · ☎ (628) 356-4308

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Francisco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm