Serving the San Francisco area  ·  (628) 356-4308  ·  Open Mon-Sun 7am-7pm
📞 (628) 356-4308 Free Quote

Metal Roofing in Redwood City, CA (94063) · Local Professionals

San Francisco Metal Roofing · Fast response in Redwood City and the San Francisco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (628) 356-4308
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Redwood City is a city of contrasts, from the historic Victorian and Edwardian homes near downtown to the mid-century ranchers and newer infill developments. The housing stock here spans more than a century, and many roofs are reaching the end of their service life. If you own a home in 94063, you know that the weather swings from damp, foggy mornings to hot, dry afternoons, and that puts real stress on any roof.

That's why homeowners in Redwood City call San Francisco Metal Roofing. We've been installing, repairing, and replacing metal roofs since 2009, and we know the local building stock. Whether you're near the Fox Theatre or up in the hills off Farm Hill Boulevard, we understand the challenges of roofing in this city.

Metal Roofing in Redwood City (94063)

Redwood City sits on the Peninsula between the bay and the coastal hills, and the terrain varies block by block. Downtown and the neighborhoods around it have flat or low-slope roofs hidden behind parapets, while the hills west of El Camino Real have steeper pitches and more exposure to wind. Older homes often have multiple roof layers, and we have to check the decking and structural condition before recommending a metal roof over shingles. The marine air and occasional atmospheric river storms can drive water into seams and flashings, especially on homes with complex rooflines. We pay close attention to ventilation and drainage, because proper airflow and gutters are critical for metal roofs in this climate.

Our team has been serving Redwood City and the surrounding San Francisco area since 2009. We're a Metal Roofing Alliance member, fully insured, and we handle everything from standing seam installations to leak repairs.

Our services in Redwood City

How a Job Works in Redwood City

Step 1: Call us at (628) 356-4308 or request a free estimate online. We'll schedule an on-site assessment at your Redwood City property, inspect the roof, discuss your options, and provide a written estimate.

Step 2: Once you approve the scope, we handle the permitting with the City of Redwood City and schedule the work. On tight lots or hillside properties, we plan material delivery and staging carefully to minimize disruption. Our crews are trained to work safely on steep pitches and around obstacles like skylights and chimneys.

Step 3: After installation, we clean the site thoroughly, walk you through the finished work, and make sure you're satisfied. We leave your property clean and your roof ready for decades of service.

Pricing for metal roofing in Redwood City depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. Repairs start at $450, and flashing or skylight repairs start at $600. We offer free estimates, so call (628) 356-4308 to get a precise quote for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Redwood City and nearby areas.

My home in the Mount Carmel neighborhood has a low-slope roof with a parapet. Can you install metal roofing there?
Yes, we can. Low-slope roofs with parapets are common in Redwood City, and we often recommend standing seam or corrugated panels with appropriate seam sealing and drainage. We'll assess the parapet condition and ensure proper flashing to prevent leaks.
A storm just blew some panels loose on my roof in Redwood City. How quickly can you respond?
We prioritize storm damage calls. Call us at (628) 356-4308, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily and provide a permanent repair estimate.
What's the typical cost for a metal roof replacement on a 1,500-square-foot home in Redwood City?
For a 1,500-square-foot home, a basic metal roof replacement might start around $13,500, but the final price depends on roof pitch, access, material choice, and whether decking repairs are needed. We provide free estimates to give you an accurate number.
Do I need a permit for a metal roof installation in Redwood City?
Yes, roofing permits are typically required for replacements and some installations. The City of Redwood City website has information on permit requirements, and we can handle the permitting process for you. Rules can change, so we always verify with the city.
My HOA requires approval for roof color changes. Can you help with that process?
Yes, we can provide color samples and documentation for your HOA. We recommend getting approval before ordering materials. If your project is near a property line, we can also discuss setback requirements and coordinate with neighbors as needed.
Are you fully insured for roofing work in Redwood City?
Absolutely. We carry general liability insurance and workers' compensation coverage for all our crews. We can provide certificates of insurance upon request.
What maintenance does a metal roof need in Redwood City's climate?
We recommend annual inspections, especially after winter storms. Check for loose fasteners, debris in gutters, and any signs of sealant wear. We offer maintenance plans and can perform inspections to catch small issues before they become leaks.

Nearby service areas

📍 San Francisco 94102📍 Daly City 94015📍 South San Francisco 94080📍 Pacifica 94044
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Francisco

All your work handled by qualified professionals in San Francisco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in San Francisco

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
San Francisco

“We had San Francisco Metal Roofing install a new metal roof on our brick apartment building, and the difference is night and day. The crew of four knocked it out in about a week, and they even swept the sidewalk and hauled away every scrap. The building looks sharper than it has in decades.”

Metal Roof Installation
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Pacifica

“Our Victorian had a tired copper roof that we were honestly scared to touch. They came out, walked us through the whole copper replacement, and matched the original detailing beautifully. It wasn't cheap, but watching that new copper go up was worth every penny.”

Copper & Specialty Metal Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
San Mateo

“Had them put a corrugated metal roof on our forest cabin and it turned out rock solid. The panels handle the rain and pine needles way better than the old shingles ever did. Took them two days and they left the site cleaner than they found it.”

Corrugated & Ribbed Panel Roofing
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Daly City

“Full metal roof replacement on our house, and I was bracing for weeks of chaos. They finished in four days, kept the yard tidy, and the new standing panels look fantastic. Only tiny gripe is they showed up a little later than promised on day one, but honestly the work speaks for itself.”

Metal Roof Replacement
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Burlingame

“We had a leak right around the chimney and couldn't figure out where it was coming from. They got up there, found the failing flashing, and had it sealed and repaired the same visit. No more drips after the next big storm, which is all I wanted.”

Flashing, Chimney & Skylight Repair
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
South San Francisco

“Didn't want the mess of tearing off our old shingles, so we went with the retrofit over them. The crew was in and out in three days and you'd never know there were shingles underneath. Really relieved we didn't have to deal with a full tear-off.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Redwood City

“Went with standing seam for our place and I'm genuinely impressed with the craftsmanship. The seams are dead straight and the whole roof looks like it belongs on a much fancier house. They cleaned up so well that my neighbor asked who did the work.”

Standing Seam Metal Roofing
Scott H.
⭐⭐⭐⭐
SH
Scott H.
Palo Alto

“I was worried about branches hanging over the house and how the roof was holding up, so I booked an inspection. They checked everything, cleared the debris off the panels, and gave me a straight answer instead of a sales pitch. Appreciated the honesty, though I wish they'd had more availability sooner.”

Metal Roof Inspection
Free Quote

Get Your Free Quote

Metal Roofing in San Francisco · Response within 24h · No commitment · ☎ (628) 356-4308

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Francisco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm