Serving the San Francisco area  ·  (628) 356-4308  ·  Open Mon-Sun 7am-7pm
📞 (628) 356-4308 Free Quote

Metal Roofing in Mill Valley, CA (94941) · Local Professionals

San Francisco Metal Roofing · Fast response in Mill Valley and the San Francisco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Mill Valley, tucked into the redwoods on the slopes of Mount Tamalpais, is a town where the trees meet the sky and the fog rolls in off the Pacific. The housing stock here ranges from mid-century ranchers and cabins nestled among the redwoods to newer hillside homes with sweeping bay views. With narrow, winding roads and lots that often slope steeply, roofing here is not a one-size-fits-all job.

Homeowners in Mill Valley (94941) call San Francisco Metal Roofing because we understand the unique challenges of roofing in a town where fire resistance and fog-driven moisture are constant concerns. Since 2009, we have been installing, repairing, and replacing metal roofs throughout Mill Valley and the surrounding areas, from the flats near downtown to the hillside properties off Panoramic Highway.

Metal Roofing in Mill Valley (94941)

Mill Valley's terrain and climate create specific roofing challenges. Many homes sit on steep, wooded lots where access is tight and the roof pitch can be extreme. The marine fog and salt air that roll in from the coast can accelerate corrosion on lesser materials, which is why we recommend standing seam and other high-quality metal systems that resist rust and fading. In the redwood-shaded neighborhoods, debris from overhanging trees can clog gutters and trap moisture, so proper flashing and gutter design are critical. We also account for the fire-resistant properties of metal roofing, a key consideration for homes in the wildland-urban interface areas around Mount Tamalpais.

Our team has been serving Mill Valley and the San Francisco area since 2009, and we are proud members of the Metal Roofing Alliance. We stay current with local building codes and understand the permitting process through the City of Mill Valley, which you can review on Mill Valley's official city site.

Our services in Mill Valley

How a Job Works in Mill Valley

Step 1: We start with a free on-site assessment. We will inspect your roof, discuss your options, and provide a detailed written estimate. We understand that many Mill Valley homes have unique architectural features or are located on steep, difficult-to-access lots, so we take the time to plan the job carefully.

Step 2: Once you approve the estimate, we schedule the work. Our crews are fully insured and experienced with the tight access and steep grades common in Mill Valley. We coordinate with any necessary permits and, if your home is in a historic district or HOA, we can help with design review. We also take care to protect your landscaping and keep the site safe.

Step 3: After installation, we clean up thoroughly and walk through the completed work with you. We leave your property clean and make sure you are satisfied with every detail.

Pricing for metal roofing in Mill Valley varies based on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, costs start at $450 for leak repairs, and screw replacement and re-fastening starts at $750. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can be a cost-effective option for some homes. Factors like steep pitch, difficult access, and the need for additional flashing or structural work can affect the final price. Call us at (628) 356-4308 for a free estimate tailored to your Mill Valley home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Mill Valley and nearby areas.

Do you work on homes in the steep, wooded areas like those off Panoramic Highway in Mill Valley?
Yes, we regularly work on hillside homes in Mill Valley, including those in the redwood-shaded areas off Panoramic Highway. Our crews are experienced with steep pitches and tight access, and we use specialized equipment to safely navigate these properties. We also take extra care to protect the surrounding trees and landscaping during the job.
What should I do if a storm causes a leak or wind damage to my metal roof in Mill Valley?
If you experience storm damage, call us immediately at (628) 356-4308. We offer free inspections for storm and wind damage. Our team will assess the damage, provide emergency repairs if needed, and work with your insurance company to document the claim. We never promise coverage, but we can help you navigate the process.
How much does a typical metal roof repair cost in Mill Valley?
Most metal roof repairs in Mill Valley start at $450 for leak repairs and $750 for screw replacement and re-fastening. The final cost depends on the extent of the damage, the type of metal roof you have, and accessibility. We provide a free estimate so you know the cost before any work begins.
Do I need a permit to replace my roof in Mill Valley?
In most cases, yes. A roofing permit is typically required for a full replacement or re-roof in Mill Valley. The specific requirements, fees, and inspection process are handled by the City of Mill Valley. We can help you understand the permit process and ensure your project complies with local regulations. You can also check the city's website for more information.
My home is in a Mill Valley HOA. Can you help with the approval process for a new metal roof?
Yes, we can provide the necessary documentation, such as material samples and specifications, to help you get HOA approval. We are familiar with the design review processes in Mill Valley and can coordinate with your HOA to ensure the chosen metal roof meets their guidelines. We recommend starting the approval process early to avoid delays.
Are you fully insured for roofing work in Mill Valley?
Absolutely. We carry both general liability insurance and workers' compensation coverage for all our crews. We are happy to provide certificates of insurance upon request, so you can have peace of mind knowing your property and our workers are protected.
How often should I have my metal roof inspected in Mill Valley's climate?
Given Mill Valley's marine fog, winter storms, and abundant tree debris, we recommend an annual inspection, ideally in late summer or early fall before the rainy season. We check for loose fasteners, debris accumulation, and signs of corrosion. Regular maintenance can extend the life of your metal roof and prevent costly leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Francisco

All your work handled by qualified professionals in San Francisco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in San Francisco

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Francisco · Response within 24h · No commitment · ☎ (628) 356-4308

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Francisco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm