Serving the San Francisco area  ·  (628) 356-4308  ·  Open Mon-Sun 7am-7pm
📞 (628) 356-4308 Free Quote

Metal Roofing in San Rafael, CA (94901) · Local Professionals

San Francisco Metal Roofing · Fast response in San Rafael and the San Francisco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

San Rafael sits where the Marin hills meet the bay, and the housing stock shows it. You've got 1920s bungalows on flat lots near downtown, hillside homes stepping up toward China Camp with steep driveways and tight access, and everything from Victorian-era cottages in Gerstle Park to mid-century ranchers in Terra Linda.

Homeowners in 94901 call us because metal roofing makes sense here: wildfire zone, marine air, and roofs that take a beating from winter storms. We've been installing and repairing metal roofs around San Rafael since 2009, and we know the difference between a roof that looks right and one that's actually fastened for these hills.

Metal Roofing in San Rafael (94901)

San Rafael isn't a single type of job. Down in the flats near Fourth Street, you're often dealing with older roofs and tight side yards, so staging materials takes planning. Up in the hills, the grade changes everything: steep pitches, limited truck access, and wind exposure that punishes poorly fastened panels. We see a lot of failed fasteners and separated seams after atmospheric-river storms, plus flashing gaps around chimneys and skylights on homes that have been re-roofed a few times over the decades. Because this is wildfire country, Class A assemblies matter, and we handle both stone-coated steel and standing seam with that in mind. Drainage is another local issue: on hillside lots, water moves fast, so gutters and downspouts need to be sized and placed correctly, not just installed.

Our experience serving San Rafael and the San Francisco area, since 2009.

Our services in San Rafael

How a Job Works in San Rafael

Step 1: You call (628) 356-4308 or request a free estimate. We schedule an on-site assessment, walk the roof, check the decking and flashing, and talk through options. You get a written estimate with pricing, not a ballpark over the phone.

Step 2: Once you approve, we handle the work. In San Rafael that often means coordinating with the city on permits, planning for narrow driveways or hillside access, and keeping the crew insured and safe on steep pitches. If your home is in an HOA or a design-review area, we help you understand what panel profiles and colors will pass.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep the yard for fasteners, gutters get checked, and we don't leave until you've seen the finished roof and know what to expect going forward.

Pricing in San Rafael depends on the roof, not just the square footage. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and retrofitting over existing shingles around $7. Repairs start at $450, leak repairs at $450, and screw replacement or re-fastening at $750. Stone-coated steel and metal shingle systems start around $9 per square foot. The big cost factors here are access (hillside lots and tight driveways take more labor), the condition of the decking and flashing, the pitch of the roof, and how quickly you need it done. We give free estimates, so call (628) 356-4308 and we'll put real numbers on your job.

✅ Metal Roofing Alliance Member, licensed and insured for work in San Rafael and nearby areas.

My house is on a steep lot in the hills above downtown San Rafael. Can you still install a metal roof?
Yes. Steep pitches and limited access are common in San Rafael, and we plan for them. That might mean a different staging approach, extra fall protection, or hand-carrying materials where a truck can't reach. We assess access during the free estimate so there are no surprises later.
A storm just lifted some panels on my roof in San Rafael. How fast can you respond?
We treat wind-lifted panels and active leaks as priorities. Call (628) 356-4308 and we'll schedule an inspection, often the same week. We can secure the roof temporarily if needed and give you a repair estimate. Storm and wind damage inspections are free.
What does a typical metal roof replacement cost in San Rafael?
Most replacements fall in the range of $9 to $12 per square foot for the roofing itself, but the total depends on size, access, decking condition, and whether you need new flashing or gutters. A 1,500 square foot roof is a different job than a 3,000 square foot hillside home. We give free written estimates so you can compare accurately.
Do I need a permit for a metal roof in San Rafael?
In most cases, yes. A full replacement or re-roof typically requires a permit, and the requirements can vary depending on the scope and the property. We recommend checking with the City of San Rafael website or the building department directly before work starts. We're happy to walk you through what we've seen on similar jobs, but the city has the final say.
My neighbor and I share a property line, and my roof drains toward their yard. What are my options?
This comes up in San Rafael's older neighborhoods where lots are close together. Drainage and property line rules are set by local code, and we can adjust gutter placement or downspout routing to keep water on your property. If you're in an HOA, review the CC&Rs first. We can coordinate with neighbors when access is needed.
Are you insured for work on my San Rafael home?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We're happy to provide proof of insurance before work begins so you're protected.
What maintenance should I do on a metal roof in San Rafael?
Check fasteners and flashing before the rainy season, usually in late fall. Clear debris from valleys and gutters, especially if you have redwoods or oaks nearby. After a big storm, look for lifted panels or loose screws. A quick annual inspection can catch small issues before they become leaks. We offer free estimates if you want a professional look.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in San Francisco

All your work handled by qualified professionals in San Francisco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in San Francisco

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in San Francisco · Response within 24h · No commitment · ☎ (628) 356-4308

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in San Francisco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm